Sales
16 products
Showing 1 - 16 of 16 products
- Indoor installation
- Natural gas/propane
- 80,000 BTU input
- 3/4" NPT gas connection
- Non-Condensing tankless water heater
- On-demand endless hot water
- Indoor wall-hung save space
- Temperature range: 95 - 149 °F (35 - 65 °C)
- Gas and water connection: 3/4" NPT
- Supporting hot showers up to 2 bathrooms simultaneously
- Intake fresh air from inside the house
- Use 5.5ft 120-Volt UL-listed Power Cord to Power
- Power Vent, 3" Stainless Steel Vent Max. Vertical or Horizontal(total) Vent Length:25ft
- CSA certified for installation in the US and Canada
- Indoor installation
- Natural gas/propane
- 100,000 BTU input
- CSA certified
- Provides up to 8.7 GPM, ideal for families of 3-4
- Non-Condensing tankless water heater
- On-demand endless hot water
- Gas and water connection: 3/4" NPT
- Temperature range: 95 - 149 °F (35 - 65 °C)
- Use 5.5ft 120-Volt UL-listed Power Cord to Power
- Intake fresh air from inside the house
- Power Vent, 3" Stainless Steel Vent Max. Vertical or Horizontal(total) Vent Length:37ft
- CSA certified for installation in the US and Canada
- Indoor installation
- Natural gas/propane
- 170,000 BTU input
- CSA certified
- 3-5 seconds to provide hot water
- 2.5 gallons tank supporting up to 2 sinks at one time
- Adjustable temperature control 55-145°F
- Hassle-free install, no pro needed
- Floor-standing or wall-mounted, wall bracket included
- 36-37" cord plugs into a 120 volt outlet
- 1/2" NPT standard water connection
- Mini Size: 13.39"W x 13.39"H x 11.42"D
- Warranty: 6 Years for Leaks, 2 Years for Parts
The MIZUDO Etech 40 Point-of-Use Water Heater combines a 4.0-gallon tank with intuitive temperature controls and rapid recovery in a compact, lightweight design. Ideal for both boosting your primary hot water system and operating independently, it delivers instant hot water to faucets and sinks. This unit efficiently conserves water and energy, eliminating the need for costly recirculation lines. Installation is simple—just connect it to your water line and plug it into a standard 120V outlet.
- Floor-standing or wall-mounted, perfect for under sink placement
- Standard 12 AMP plug for 120V outlets (no hard wiring necessary)
- Included Components:Water Heater x 1, User Manual x 1, T & P Relief Valve x 1
- Limited Warranty – 6 Years - Leaks, 2 Years - Parts
Do you want to eliminate time for hot water? The Fogatti MINI tank water heater boosts your primary hot water source or works alone to provide instant hot water at faucet or sink.Just tap it into water line & plugging into the outlet.
- 3-5 seconds to provide hot water
- 8.0 gallons of efficient hot water where you need it
- Adjustable temperature control 55-145°F
- Hassle-free install, no pro needed
- Floor-standing or wall-mounted, wall bracket included
- 36-37" cord plugs into a 120 volt outlet
- 1/2" NPT standard water connection
- Mini Size: 17.32"W x 17.32"H x 15.35"D
- Warranty: 6 Years for Leaks, 2 Years for Parts
- Non-Condensing tankless water heater
- On-demand endless hot water
- Gas and water connection: 3/4" NPT
- Indoor wall-hung save space
- Temperature range: 95 - 149 °F (35 - 65 °C)
- Supporting 2 showers and 2 sinks simultaneously
- Intake fresh air from inside the house
- Use 5.5ft 120-Volt UL-listed Power Cord to Power
- Power Vent, 3" Stainless Steel Vent Max. Vertical or Horizontal(total) Vent Length:25ft
- CSA certified for installation in the US and Canada
- 5-year heat exchanger and 2-year parts warranty
- Indoor installation
- Natural gas/propane
- 120,000 BTU input
- Non-Condensing indoor wall-hung to save space
- On-demand endless hot water with range 95 - 149 °F (35 - 65 °C)
- Supporting one shower and one sink simultaneously
- Gas and water connection: 3/4" NPT
- Use 5.5ft 120-Volt UL-listed Power Cord to Power
- Power Vent, 3" Stainless Steel Vent Max. Vertical or Horizontal(total) Vent Length:25ft
- CSA certified for installation in the US and Canada
- Indoor installation
- Natural gas/propane
- 80,000 BTU input
- CSA certified
- Advanced Filtration: 9-stage system removes over 1,000 harmful contaminants while restoring essential minerals and maintaining balanced alkalinity.
- Tankless Design: Fresh, continuous water supply without the risks of stagnant water.
- High Capacity: Capacity up to 800 GPD per day with a fast flow rate of 0.6 gallons per minute.
- Water conservation: Adoption of wastewater recycling technology to reduce wastewater discharge rate.
- Space-Saving: Under-sink installation with a countertop pitcher.
- Tankless Under Sink
- 800GPD Capacity
- 0.6GPM Flow Rate
- NSF/ANSI Certified
- Advanced Filtration: 9-stage system removes over 1,000 harmful contaminants while restoring essential minerals and maintaining balanced alkalinity.
- Tankless Design: Fresh, continuous water supply without the risks of stagnant water.
- High Capacity: Capacity up to 1,000 GPD per day with a fast flow rate of 0.7 gallons per minute.
- Water conservation: Adoption of wastewater recycling technology to reduce wastewater discharge rate.
- Space-Saving: Under-sink installation with a countertop pitcher.
- Tankless Under Sink
- 1000GPD Capacity
- 0.7GPM Flow Rate
- NSF/ANSI Certified
The MIZUDO Etech 25 Point-of-Use Water Heater combines a 2.5-gallon tank with intuitive temperature controls and rapid recovery in a compact, lightweight design. Ideal for both boosting your primary hot water system and operating independently, it delivers instant hot water to faucets and sinks. This unit efficiently conserves water and energy, eliminating the need for costly recirculation lines. Installation is simple—just connect it to your water line and plug it into a standard 120V outlet.
- Floor-standing or wall-mounted, perfect for under sink placement
- Standard 12 AMP plug for 120V outlets (no hard wiring necessary)
- Included Components:Water Heater x 1, User Manual x 1, T & P Relief Valve x 1
- Limited Warranty: 6 Years - Leaks, 2 Years - Parts
- Digital display and output water temp. range from 86°F to 140°F
- Make sure this water heater tankless is sized for your hot water needs:18 kW; 75A/240V; circuit breaker required 2 x bipolar 40 amps; unit dimensions 17.0"*13.0"*4.9"; water connection 3/4" NPT.
- Instantly provides ample hot water for up to 3 showers.
- For whole home
- Unlimited hot water on demand
- Digital display,86°F to 140°F
- Digital display and touch panel,output water temp. range from 86°F to 140°F
- Make sure this water heater tankless is sized for your hot water needs:14 kW; 59A/240V; circuit breaker required 2 x bipolar 40 amps; unit dimensions 14.4"*9.7"*2.8"; water connection 1/2" NPT.
- Instantly provides ample hot water for up to one shower and one faucet.
- For kitchen, bathroom or laundry
- Point of use
- Digital touch screen temperature control
- Easy to install