MIZUDO

• vent straight pipe
• High-Quality Material

• Perfect for Water Heater Round Tube Air Ventilation and Vent Pipe Ductwork

• Perfect for Water Heater Round Tube Air Ventilation and Vent Pipe

• Long Time Protection Without Sulfur Smell/Limescale
• Rapid Action Within 24hrs
• Ideal for Residential and RV Use

• Provides continuous hot water for point-of-use applications
• Small, compact design fits under sinks and in cabinets
• Tankless water heater requires 1 x 50 AMP double pole breakers

• Uses 3,500W of power at 120v
• 40 Amp single pole breaker, 10/2 AWG wire; not a plug-in unit
• Digital display and touch panel,output water temp. range from 86°F to 140°F
• Ideal for a single sink application in areas with at least 57°F ground water temperature

The MIZUDO Etech 25 Point-of-Use Water Heater combines a 2.5-gallon tank with intuitive temperature controls and rapid recovery in a compact, lightweight design. Ideal for both boosting your primary hot water system and operating independently, it delivers instant hot water to faucets and sinks. This unit efficiently conserves water and energy, eliminating the need for costly recirculation lines. Installation is simple—just connect it to your water line and plug it into a standard 120V outlet.

• Floor-standing or wall-mounted, perfect for under sink placement
• Standard 12 AMP plug for 120V outlets (no hard wiring necessary)
• Included Components：Water Heater x 1, User Manual x 1, T & P Relief Valve x 1
• Limited Warranty: 6 Years - Leaks, 2 Years - Parts

The MIZUDO Etech 40 Point-of-Use Water Heater combines a 4.0-gallon tank with intuitive temperature controls and rapid recovery in a compact, lightweight design. Ideal for both boosting your primary hot water system and operating independently, it delivers instant hot water to faucets and sinks. This unit efficiently conserves water and energy, eliminating the need for costly recirculation lines. Installation is simple—just connect it to your water line and plug it into a standard 120V outlet.

• Floor-standing or wall-mounted, perfect for under sink placement
• Standard 12 AMP plug for 120V outlets (no hard wiring necessary)
• Included Components：Water Heater x 1, User Manual x 1, T & P Relief Valve x 1
• Limited Warranty – 6 Years - Leaks, 2 Years - Parts

The MIZUDO Etech 80 Point-of-Use Water Heater combines a 8.0-gallon tank with intuitive temperature controls and rapid recovery in a compact, lightweight design. Ideal for both boosting your primary hot water system and operating independently, it delivers instant hot water to faucets and sinks. This unit efficiently conserves water and energy, eliminating the need for costly recirculation lines. Installation is simple—just connect it to your water line and plug it into a standard 120V outlet.

• Floor-standing or wall-mounted, perfect for under sink placement
• Standard 12 AMP plug for 120V outlets (no hard wiring necessary)
• Included Components：Water Heater x 1, User Manual x 1, T & P Relief Valve x 1
• Limited Warranty – 6 Years - Leaks, 2 Years - Parts

• Digital display and touch panel,output water temp. range from 86°F to 140°F
• Make sure this water heater tankless is sized for your hot water needs:14 kW; 59A/240V; circuit breaker required 2 x bipolar 40 amps; unit dimensions 14.4"*9.7"*2.8"; water connection 1/2" NPT.
• Instantly provides ample hot water for up to one shower and one faucet.

• Make sure this water heater tankless is sized for your hot water needs: 18 kW; 240 volts; circuit breaker required 2 x bipolar 40 amps; unit dimensions 17" x 13" x 3.6"; water connection 3/4" NPT.
• Instantly provides ample hot water for up to 1 shower and 2 faucets

• Digital display and touch panel,output water temp. range from 86°F to 140°F
• Make sure this water heater tankless is sized for your hot water needs:24 kW; 100A/240V; circuit breaker required 3 x bipolar 40 amps; unit dimensions 17.0"*13.0"*4.9"; water connection 3/4" NPT.
• Instantly provides ample hot water for up to 2 showers and 1 faucets.

• Serves a Single Sink or Low-flow Fixture
• Point-of-use, Continuous On-demand Hot Water
• Make Sure To Install This Water Heater Correctly: 6.5kW At 240-Volt Draw Max 27.1A, Required Breaker 1x32 Amp, Wire Gauge 10 AWG/2, Water Connection 1/2 In. Npt. Item Dimensions: 12.8 In. L X 8.6 In. W X 2.3 In. H.

• Make sure this water heater tankless is sized for your hot water needs: 27 kW; 113A/240V ; circuit breaker required 3 x bipolar 40 amps; unit dimensions 17.0"*13.0"*3.6"; water connection 3/4" NPT.
• Instantly provides ample hot water for up to 4 showers.

• Provides continuous hot water for point-of-use applications
• Digital display and touch panel,output water temp. range from 86°F to 140°F
• Make sure this water heater tankless is sized for your hot water needs:8kW; 34A/240V; circuit breaker required 1 x 40 amps; unit dimensions 14.4"*9.7"*2.8"; water connection 1/2" NPT.

• Advanced Filtration: 9-stage system removes over 1,000 harmful contaminants while restoring essential minerals and maintaining balanced alkalinity.
• Tankless Design: Fresh, continuous water supply without the risks of stagnant water.
• High Capacity: Capacity up to 1,000 GPD per day with a fast flow rate of 0.7 gallons per minute.
• Water conservation: Adoption of wastewater recycling technology to reduce wastewater discharge rate.
• Space-Saving: Under-sink installation with a countertop pitcher.

• Advanced Filtration: 9-stage system removes over 1,000 harmful contaminants while restoring essential minerals and maintaining balanced alkalinity.
• Tankless Design: Fresh, continuous water supply without the risks of stagnant water.
• High Capacity: Capacity up to 800 GPD per day with a fast flow rate of 0.6 gallons per minute.
• Water conservation: Adoption of wastewater recycling technology to reduce wastewater discharge rate.
• Space-Saving: Under-sink installation with a countertop pitcher.

Looking to replace your bulky and inefficient tank water heater?
Try our tankless water heater! Say goodbye to long waits and hello to endless hot water for your home. Whether it’s for showers or kitchen use, our tankless water heater delivers hot water on demand without a hitch.
With an impressive output of 4.1 gallons per minute at an inlet temperature of 77°F, it can effortlessly support multiple points of use at once. Equipped with precise temperature control, a high-efficiency fan, and an electronic display, this water heater ensures a comfortable and reliable hot water experience.

• Non-Condensing indoor wall-hung to save space
• On-demand endless hot water with range 95 - 149 °F (35 - 65 °C)
• Supporting one shower and one sink simultaneously
• Gas and water connection: 3/4" NPT
• Use 5.5ft 120-Volt UL-listed Power Cord to Power
• Power Vent, 3" Stainless Steel Vent Max. Vertical or Horizontal(total) Vent Length:25ft
• CSA certified for installation in the US and Canada
• 5-year heat exchanger and 2-year parts warranty

• Non-Condensing tankless water heater
• On-demand endless hot water
• Indoor wall-hung save space
• Intake fresh air from inside the house
• 3/4" NPT gas and water connection
• Temperature range: 95 - 149 °F (35 - 65 °C)
• Supporting one shower and 2 sinks simultaneously
• Intake fresh air from inside the house
• Use 5.5ft 120-volt UL-listed Power Cord to Power
• Power Vent, 3" Stainless Steel Vent Max. Vertical or Horizontal(total) Vent Length:25ft
• CSA certified for installation in the US and Canada
• 5-year heat exchanger and 2-year parts warranty

• Non-Condensing tankless water heater
• On-demand endless hot water
• Indoor wall-hung save space
• Temperature range: 95 - 149 °F (35 - 65 °C)
• Gas and water connection: 3/4" NPT
• Supporting hot showers up to 2 bathrooms simultaneously
• Intake fresh air from inside the house
• Use 5.5ft 120-Volt UL-listed Power Cord to Power
• Power Vent, 3" Stainless Steel Vent Max. Vertical or Horizontal(total) Vent Length:25ft
• CSA certified for installation in the US and Canada
• 5-year heat exchanger and 2-year parts warranty

• Non-Condensing tankless water heater
• On-demand endless hot water
• Gas and water connection: 3/4" NPT
• Indoor wall-hung save space
• Temperature range: 95 - 149 °F (35 - 65 °C)
• Supporting 2 showers and 2 sinks simultaneously
• Intake fresh air from inside the house
• Use 5.5ft 120-Volt UL-listed Power Cord to Power
• Power Vent, 3" Stainless Steel Vent Max. Vertical or Horizontal(total) Vent Length:25ft
• CSA certified for installation in the US and Canada
• 5-year heat exchanger and 2-year parts warranty