• Non-Condensing tankless water heater
• On-demand endless hot water
• Gas and water connection: 3/4" NPT
• Temperature range: 95 - 149 °F (35 - 65 °C)
• Supporting hot showers up to 2-3 bathrooms simultaneously
• Use 5.5ft 120-Volt UL-listed Power Cord to Power
• Intake fresh air from inside the house
• Power Vent, 3" Stainless Steel Vent Max. Vertical or Horizontal(total) Vent Length:37ft
• CSA certified for installation in the US and Canada
• 5-year heat exchanger and 2-year parts warranty

• Non-Condensing tankless water heater
• On-demand endless hot water
• Indoor wall-hung save space
• Temperature range: 95 - 149 °F (35 - 65 °C)
• Gas and water connection: 3/4" NPT
• Supporting hot showers up to 2 bathrooms simultaneously
• Intake fresh air from inside the house
• Use 5.5ft 120-Volt UL-listed Power Cord to Power
• Power Vent, 3" Stainless Steel Vent Max. Vertical or Horizontal(total) Vent Length:25ft
• CSA certified for installation in the US and Canada
• 5-year heat exchanger and 2-year parts warranty

• Non-Condensing tankless water heater
• Outdoor installation, saving space
• No exhaust required
• 5-year heat exchanger and 2-year parts warranty

• Non-Condensing tankless water heater
• On-demand endless hot water
• Gas and water connection: 3/4" NPT
• Indoor wall-hung save space
• Temperature range: 95 - 149 °F (35 - 65 °C)
• Supporting 2 showers and 2 sinks simultaneously
• Intake fresh air from inside the house
• Use 5.5ft 120-Volt UL-listed Power Cord to Power
• Power Vent, 3" Stainless Steel Vent Max. Vertical or Horizontal(total) Vent Length:25ft
• CSA certified for installation in the US and Canada
• 5-year heat exchanger and 2-year parts warranty

• Uses 3,500W of power at 120v
• 40 Amp single pole breaker, 10/2 AWG wire; not a plug-in unit
• Digital display and touch panel,output water temp. range from 86°F to 140°F
• Ideal for a single sink application in areas with at least 57°F ground water temperature

• Provides continuous hot water for point-of-use applications
• Small, compact design fits under sinks and in cabinets
• Tankless water heater requires 1 x 50 AMP double pole breakers

• Digital display and touch panel,output water temp. range from 86°F to 140°F
• Make sure this water heater tankless is sized for your hot water needs:14 kW; 59A/240V; circuit breaker required 2 x bipolar 40 amps; unit dimensions 14.4"*9.7"*2.8"; water connection 1/2" NPT.
• Instantly provides ample hot water for up to one shower and one faucet.

• Make sure this water heater tankless is sized for your hot water needs: 18 kW; 240 volts; circuit breaker required 2 x bipolar 40 amps; unit dimensions 17" x 13" x 3.6"; water connection 3/4" NPT.
• Instantly provides ample hot water for up to 1 shower and 2 faucets

The MIZUDO Etech 80 Point-of-Use Water Heater combines a 8.0-gallon tank with intuitive temperature controls and rapid recovery in a compact, lightweight design. Ideal for both boosting your primary hot water system and operating independently, it delivers instant hot water to faucets and sinks. This unit efficiently conserves water and energy, eliminating the need for costly recirculation lines. Installation is simple—just connect it to your water line and plug it into a standard 120V outlet.

• Floor-standing or wall-mounted, perfect for under sink placement
• Standard 12 AMP plug for 120V outlets (no hard wiring necessary)
• Included Components：Water Heater x 1, User Manual x 1, T & P Relief Valve x 1
• Limited Warranty – 6 Years - Leaks, 2 Years - Parts

The MIZUDO Etech 40 Point-of-Use Water Heater combines a 4.0-gallon tank with intuitive temperature controls and rapid recovery in a compact, lightweight design. Ideal for both boosting your primary hot water system and operating independently, it delivers instant hot water to faucets and sinks. This unit efficiently conserves water and energy, eliminating the need for costly recirculation lines. Installation is simple—just connect it to your water line and plug it into a standard 120V outlet.

• Floor-standing or wall-mounted, perfect for under sink placement
• Standard 12 AMP plug for 120V outlets (no hard wiring necessary)
• Included Components：Water Heater x 1, User Manual x 1, T & P Relief Valve x 1
• Limited Warranty – 6 Years - Leaks, 2 Years - Parts

The MIZUDO Etech 25 Point-of-Use Water Heater combines a 2.5-gallon tank with intuitive temperature controls and rapid recovery in a compact, lightweight design. Ideal for both boosting your primary hot water system and operating independently, it delivers instant hot water to faucets and sinks. This unit efficiently conserves water and energy, eliminating the need for costly recirculation lines. Installation is simple—just connect it to your water line and plug it into a standard 120V outlet.

• Floor-standing or wall-mounted, perfect for under sink placement
• Standard 12 AMP plug for 120V outlets (no hard wiring necessary)
• Included Components：Water Heater x 1, User Manual x 1, T & P Relief Valve x 1
• Limited Warranty: 6 Years - Leaks, 2 Years - Parts